Anchor winches SH 20

The anchor winch SH 20 is designed for installation on inflatable boats up to 4 meters long. An anchor rope with a length of 30 meters with a thickness of 3.5 mm and wound on the winch coil is supplied with the winch. The breaking load of the anchor rope is 360 kg. The winch cover is made of a durable ABC plastic which is not afraid of the effects of ultraviolet rays, as well as sudden temperature changes. The complete set includes a roulette, fasteners, power. Details of the winch mechanism are made of durable steel with galvanic coating. The winch has a quiet working mechanism. In this model, in contrast to the SH 35 PRO model, there is no “smooth entry function of the anchor in the water”. When the anchor reset button is pressed, the anchor leaves the roll and in free fall rushes into the water. Thanks to the “free anchor reset” function, within a few seconds it reaches the bottom. The entire mechanism of the anchor winch is implemented mechanically, which significantly increases the reliability of the mechanism and, in general, the winch itself. The anchor winch SH 20 has a motor with a power of 80 watts. For correct operation of the anchor winch, the recommended weight range for anchors is (11-18 LB) (5-8 kg).

Technical Details 

1. Housing winch

Housing winches, as well as all mounting brackets , made ​​of solid steel.

2 . Winch mechanism
Winch mechanism consists of a gear mechanism gated svobonogo reset mechanism and the armature coil winding anchor line.

3. Electric equipment
A 12 V motor is used as a part of the winch electric equipment. Non-locking three-position dump-proof knob is installed on the cover. Wire of 5 m long for winch connection is included into the winch set as well as a thermal safety relay.

4. Winch cover
The lid of winch is executed from a durable plastic. On the lid of winch the management button is located by a winch.

5. Roller
Winch cover is made from stainless steel and contains a control knob.

6. Anchor rope
Nylon rope winch is provided with a diameter of 3.5 mm and a length of 30 m and a tensile force of 360 kg.

7. Fastening
The winch mounting kit supplied galvanized bolts and nuts for mounting the winch housing and the roller.

For correct and durable work of the winch, we recommend using STRONGER anchors!

Anchor winch includes a roller and the winch itself. Using the anchor winch is prohibited without regular roller!

Specification:

Maximum anchor weight - 8 kg

Boat length, up to - 4m

Anchor rope - ∅ 3,5 mm, length 30 m

Roller - yes

Control button - yes

Function buttons - ascent / descent

Rod for safe transport anchors - yes

The function of a smooth entry of the anchor into the water - no

Free discharge armature - yes

The rate of rise of the armature - 20 m/min

The weight - 9 kg

Package dimensions (LxWxH) -377х307х177 mm

Winch Dimensions (LxWxH) - 250,5х260,5х130 мм

Roller Dimensions (LxWxH) -260x82x129 mm

Max. Working load - 90 kg