| Operating Temperature | -25° to +55°C (-13° to +130°F) | 
| Relative humidity | +35° C (95° F), 95% RH | 
| Waterproof | IPX6 | 
| Max relative wind velocity | 51 m/sec (100 Knots) | 
| Complience | CE, FCC (ID:RAY3G4G), IC: 4697A-3G4G, IEC60945 : 2002 | 
| Power consumption (with 10m cable) | Operating: 14.5 to 27W at 13.8 V | 
| Standby | 3.9 W (Typ.) at 13.8 V DC ~ 170 mA | 
| DC input (at end of radar cable) | 9 V to 31.2 V DC (12/24 V systems) | 
| Reverse polarity protection | Yes | 
| Minimum startup voltage | 10.75 V DC | 
| Transmitter source (pre-heating time) | No magnetron – Instant On | 
| Outside dimensions | Ø Diameter 610 mm (24”), Height 225 mm (8.9”) | 
| Scanner weight (no cable) | 6.75kg (14.9 lbs) | 
| Radar ranges | 100 m (328 ft) to 48nm with 18 range settings, (nm/sm/km) | 
| Rotation (mode dependent) | 20 - 60 rpm (mode and MFD dependent) | 
| Transmitter frequency | X-band - 9.4 to 9.5 Ghz | 
| Transmitter source (warm-up time) | No Magnetron – all solid state. Instant On™ | 
| Plane of polarization | Horizontal Polarization | 
| Transmitter peak power output | 25W | 
| Minimum range | 6 m (19.7 ft) | 
| Sweep repetition frequency | 700-2400 Hz (mode dependent) | 
| Pulse length | 0.04 - 64 usec | 
| Sweep bandwidth | 48 MHz max | 
| Horizontal beam width (Tx and Rx antenna) | 3.9° nominal (-3 dB width) | 
| Target Seperation Control | OFF: 3.9°+/-10% (-3 dB width nominal), LOW: ~3.4°+/-10% (-3 dB width nominal), MED: ~2.5°+/-10% (-3 dB width nominal), HIGH: ~2.0°+/-10% (-3 dB width nominal) | 
| Vertical beam width (Tx and Rx antenna) | 22° (-3B width nominal) | 
| Side lobe level (Tx and Rx antenna) | Below -18 dB (within ±10°);Below -24 dB (outside ±10°) | 
| Noise figure | Less than 5 dB nominal | 
| Protocol | Ethernet 100 Base T | 
| Maximum inter connecting cable length | 30 m (98.5 ft) – available as option, use NEP-2 for longer cable runs |